Irdroino Pronto USB IR Blaster Kit with enclosure

Product Description The Irdroino Pronto USB IR Blaster Kit will allow you to experiment with sending PRONTO HEX IR codes to any IR remote control appliance via your PC, Mac, or Raspberry Pi. The Irdroino Pronto USB IR Blaster Kit comes pre-loaded with a demo code for sending PRONTO HEX codes (databases with codes available on the Internet) . The Irdroino Pronto USB IR Blaster kit is shipped  with a UNO Board, plastic enclosure, Irdroino board and a USB cable Example Samsung discreate ON command:“SEND 0000 006D 0000 0022 00AC 00AC 0015 0040 0015 0040 0015 0040 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0040 0015 0040 0015 0040 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0040 0015 0015 0015 0015 0015 0040 0015 0040 0015 0015 0015 0015 0015 0040 0015 0015 0015 0040 0015 0040 0015 0015 0015 0015 0015 0040 0015 0040 0015 0015 0015 0689” Features:* Irdroino Pronto USB IR Blaster using Serial ACM interface * 2 High Power IR Led * High Quality IR Receiver IC. * Preloaded with a Pronto USB IR Blaster Arduino sketch. * Plastic enclosure Supported Systems ( no drivers needed ):*MS Windows *GNU Linux *Mac OS X *Raspberry Pi *Android Package Contents:*Irdroino IR shield – 1pcs*Arduino-like mega328 board – 1pcs*Plastic enclosure – 1pcs*USB Cable – 1pcsProduct Video:Downloads:https://github.com/irdroid/irdroinohttp://irdb.tk/ – Open Source Pronto IR database with API interfacePronto HEX IR Blaster SketchIrdroino Demo code – record and replay IR codeshttps://github.com/Irdroid/UsbSerial/releases/tag/v1.0 – Application for Android that will allow you to send PRONTO HEX, by using the Irdroino PRONTO IR Blaster, connected to your device The Irdroino Pronto USB IR Blaster kit can be programmed with the Irdroino demo code above, by which you can test also the IR receiving functionality of the unit. By pressing the left button – “RX” the unit switches into “learning mode” and you can scan a remote control button from a IR remote. After that by pressing the “TX” button you can reproduce the recorded IR signal. The Irdroino Pronto USB IR Blaster kit can be programmed by using the standard Arduino IDE.